EPA 608 (HVAC) — EPA608 — Type II Practice Test

Free, focused EPA608 — Type II topic test for EPA Section 608 Technician Certification — 13 questions at real exam difficulty, with instant scoring and explanations.

Start Type II test → Full EPA 608 (HVAC) mock

Practise EPA608 — Type II for EPA 608 (HVAC)

Type II is a scoring area in EPA 608 (HVAC). This chapter test isolates EPA608 — Type II so you can drill just this topic, find your weak spots, and fix them before sitting a full-length EPA 608 (HVAC) mock. Each attempt serves a fresh set of 13 questions from the EPA 608 (HVAC) EPA608 — Type II bank.

Sample Type II questions

A high-pressure appliance under Type II uses refrigerants such as:
For high-pressure appliances with a full charge of more than 5 lb, recovery to the required vacuum level depends on whether the recovery equipment was made before or after:
Leak repair requirements apply to appliances containing 50 or more pounds of refrigerant when the leak rate exceeds the EPA threshold for the appliance type. Commercial refrigeration threshold is:
The leak rate threshold triggering repair for comfort-cooling appliances (≥50 lb) is:
The standardized evacuation requirement is measured in:
Practise all 13 Type II questions →

More EPA 608 (HVAC) topic tests

Drill every chapter of the EPA 608 (HVAC) syllabus:

Frequently asked questions

Does EPA 608 (HVAC) include Type II questions?
Yes. EPA608 — Type II is part of the EPA 608 (HVAC) syllabus. This topic test gives you 13 focused Type II questions at real exam difficulty so you can master the chapter before the full mock.
Is the EPA 608 (HVAC) Type II test free?
Yes — start the Type II topic test free on Wrexa Edge. No credit card needed. You also get the full EPA 608 (HVAC) mock and 7+ other topic tests for this exam.
How many Type II questions are there?
This Type II drill has 13 questions. Each attempt draws a fresh set from the EPA 608 (HVAC) EPA608 — Type II question bank, so you can repeat it for more practice.

Ready to master Type II?

Free EPA 608 (HVAC) Type II drill + full-length mocks on Wrexa Edge.

Start free →