PE Mechanical exam at a glance
50 full-length mock tests
Attempt 50 full-length mocks
Each is a distinct question set built on the real 70-question, 473-minute pattern, with instant scoring and section-wise analysis. The first is free; unlock all 50 forever for $1.99 (one-time, no subscription).
PE Mechanical key facts & eligibility
| Conducting body | National Council of Examiners for Engineering and Surveying (NCEES); licensure is granted by your state/territory board |
|---|---|
| Official website | ncees.org ↗ |
| Mode | A computer-based exam offered year-round at Pearson VUE centres, with an 8-hour appointment and 80 questions. You choose one depth area — HVAC & Refrigeration, Machine Design & Materials, or Thermal & Fluid Systems — and the exam mixes multiple-choice with alternative item types. An electronic reference handbook and specified standards are provided. |
| Frequency | On demand, year-round (typically one attempt per testing window). |
| Scoring & marking | Scored pass/fail against a standard set by the NCEES Board; there is no published passing percentage and no penalty for wrong answers. Results are usually available 7–10 days after testing. |
| Language | English. |
Who is eligible for PE Mechanical?
Set by each state licensing board; the usual path is passing the FE exam, gaining qualifying engineering experience (commonly around four years under a licensed PE), then sitting the PE as the final written step toward Professional Engineer licensure.
Last verified July 2026 against NCEES — PE Mechanical. Always confirm current details on the official website before you register.
PE Mechanical section breakdown
The PE Mechanical mock test on Wrexa Edge replicates the real exam's section structure — same names, same question count per section, same time limits. No inter-section breaks — the timer runs continuously.
-
PE Mechanical (70 Q)
Marking scheme
+1 per correct. Try your score.
Strategy: PE Mechanical has no negative marking. Attempt every question — blank answers cost you potential marks but cannot pull your score down.
Scale: PE Mech (pass ~50/80).
How PE Mechanical is conducted
- Mode
- Test format
- Backtracking
- Mark for review
Tools available during the PE Mechanical exam
-
Calculator
Wrexa Edge renders these tools inside the mock test exactly as they appear on the real PE Mechanical exam — same shortcuts, same behaviour.
PE Mechanical time strategy
With 70 questions in 473 minutes, you have about 405 seconds per question on average. Successful candidates aim for the following pacing on each section:
- PE Mechanical (70 Q)
Wrexa Edge's analytics show your actual time-per-question after every mock so you can spot which sections you're losing time on.
PE Mechanical topics covered
Across the 50 Wrexa Edge variants of PE Mechanical, the following topics appear most often (sample distribution from one variant):
PE Mechanical (70 Q)
- PE Mechanical — Machine Design · 17
- PE Mechanical — Thermodynamics · 15
- PE Mechanical — Heat Transfer · 13
- PE Mechanical — Fluid Mechanics · 13
- PE Mechanical — HVAC · 12
PE Mechanical difficulty calibration
Elite tier. Elite-tier: among the toughest exams in its category. Most successful candidates prepare for 6-12+ months.
NCEES PE Mechanical · 80 Q · 9h · depth selection from 3 options. CBT format. · Official language: English.
Verified content — Wrexa Edge's PE Mechanical bank has been deeply curated with real exam-aligned content (estimated 100% syllabus coverage).
How Wrexa Edge prepares you for PE Mechanical
- Real test-day interface
- 50 distinct variants
- Detailed analytics
- Spaced repetition (Notebook)
- Optional proctoring
- Free to start
Expert take: what PE Mechanical really tests
The PE Mechanical is a year-round, 8-hour computer-based exam of 80 questions — mechanical breadth plus one chosen depth area (HVAC & Refrigeration, Machine Design & Materials, or Thermal & Fluid Systems) — scored pass/fail. The provided electronic NCEES handbook is the only reference, so fast lookups matter.
Preparation tips
- Pick your depth area early and go deep, while keeping breadth solid across all mechanical topics.
- Learn the NCEES PE Mechanical Reference Handbook until navigation is instant.
- Rehearse the on-screen handbook workflow so exam-day lookups do not cost you time.
Common mistakes to avoid
- Neglecting breadth topics outside your depth area — they are half the exam.
- Studying from paper texts instead of the searchable electronic handbook format.
PE Mechanical study plan
A phase-by-phase roadmap from your first concept to test-ready. Stretch or compress each phase to fit the time you have before your attempt.
- Review mechanical breadth: thermodynamics, fluids, heat transfer and mechanics
- Get fluent in the NCEES PE Mechanical Reference Handbook
- Choose your depth area (HVAC, Machine Design or Thermal-Fluids)
- Go deep in your chosen depth module
- Practise multiple-choice and alternative item types
- Drill fast handbook lookups under time
- Sit the official NCEES practice exam in the electronic-handbook workflow
- Build 8-hour stamina across 80 questions
- Shore up weak breadth topics
Where PE Mechanical can take you
A strong PE Mechanical result opens up these careers and higher-study paths:
- Professional Engineer licensure
- Authority to stamp designs
- Depth-area specialisation
- Career progression
Best books & official prep for PE Mechanical
- PE Mechanical Reference Handbook — NCEES
- PE Mechanical Review (depth-specific) — Michael R. Lindeburg (PPI)
Official practice: NCEES sells the official practice exam and the PE Mechanical Reference Handbook and publishes exam specifications by depth area — practise inside the electronic-handbook workflow.
Previous-year papers: NCEES does not release past exams; the official NCEES practice exam is the closest match to real content and format.
Sample PE Mechanical practice questions
5 questions taken from the PE Mechanical mock tests on Wrexa Edge. Try each one, then reveal the answer.
-
Q1. A point has σx = 100 MPa and τxy = 50 MPa (all other stresses zero). What is the von Mises stress?
- 141.4 MPa
- 150.0 MPa
- 111.8 MPa
- 132.3 MPa
Show answer
Answer: D — 132.3 MPa
-
Q2. Three thermal resistances of 0.05, 0.20 and 0.15 K/W are in series with an overall temperature difference of 80 K. What is the heat rate?
- 200 W
- 32 W
- 400 W
- 229 W
Show answer
Answer: A — 200 W
-
Q3. Outdoor air (1 kg/s at 32 °C) mixes adiabatically with return air (3 kg/s at 24 °C). Approximately what is the mixed-air dry-bulb temperature?
- 28.0 °C
- 26.0 °C
- 30.0 °C
- 25.0 °C
Show answer
Answer: B — 26.0 °C
-
Q4. A vapor-compression refrigerator has a refrigerating effect of 150 kJ/kg and a compressor work input of 40 kJ/kg. What is its COP?
- 4.75
- 2.67
- 3.75
- 2.75
Show answer
Answer: C — 3.75
-
Q5. A pump develops 40 m of head at 1,200 rpm. What head does it develop at 1,500 rpm with the same impeller?
- 50.0 m
- 78.1 m
- 55.9 m
- 62.5 m
Show answer
Answer: D — 62.5 m
Frequently asked questions
- What is the PE Mechanical exam pattern?
- NCEES PE Mechanical (HVAC + Refrig / Machine Design / Thermal-Fluids) contains 70 questions across 1 section: PE Mechanical (70 Q). Total duration is 473 minutes (about 405 seconds per question).
- Does PE Mechanical have negative marking?
- No — PE Mechanical has no negative marking. Each correct answer is worth 1 mark, so attempt every question.
- How is PE Mechanical scored?
- Scaled score range: 100 to 1000. PE Mech (pass ~50/80).
- How can I practise PE Mechanical online for free?
- Wrexa Edge gives you a free full-length PE Mechanical mock test — with instant scoring, detailed explanations and analytics — plus 49 more with a one-time $1.99 unlock that never expires. Start practising in under a minute, no card required.
- What is the difficulty level of PE Mechanical?
- PE Mechanical is rated Elite difficulty on Wrexa Edge. Elite-tier: among the toughest exams in its category. Most successful candidates prepare for 6-12+ months. NCEES PE Mechanical · 80 Q · 9h · depth selection from 3 options. CBT format. · Official language: English.
- How long is the PE Mechanical exam?
- PE Mechanical runs for 473 minutes total. On Wrexa Edge the timer is enforced exactly as on the real exam — including no inter-section breaks.
- What topics are covered in PE Mechanical?
- PE Mechanical is split into: PE Mechanical (70 Q). Each section is timed and weighted separately. NCEES PE Mechanical · 80 Q · 9h · depth selection from 3 options. CBT format. · Official language: English.
- What tools or aids are allowed during PE Mechanical?
- On-screen scientific calculator (matches the real exam interface). Note: real exam is proctored — Wrexa Edge mirrors this with a webcam-based proctoring flow you can enable.
- Is the PE Mechanical test adaptive?
- No — PE Mechanical is a fixed-form (linear) test. Every candidate sees the same number of questions per section.
- How many PE Mechanical mock tests does Wrexa Edge offer?
- Wrexa Edge generates 50 distinct PE Mechanical variants — each with different question content, not just shuffled options — the first one free for everyone and 49 more with a one-time $1.99 unlock. That's 3500 unique practice questions in the real test-day interface.
- Is there a free PE Mechanical test series 2026?
- Yes. The Wrexa Edge PE Mechanical test series for 2026 gives you a free full-length mock test (50 in total) plus subject-wise and topic-wise tests — instant scoring and detailed analysis, no card required.
- Are PE Mechanical previous year question–style papers included?
- Every PE Mechanical mock is modelled on the official exam pattern and the style of previous years' papers — the same 70-question structure, sections and marking — so your practice mirrors the real paper you'll sit.
- Which is the best free PE Mechanical mock test online?
- Wrexa Edge's PE Mechanical mock test replicates the real exam interface, timing and marking scheme, with instant score, section-wise analysis and 50 fresh variants — a strong free choice for 2026 preparation.
- Can I take the PE Mechanical mock test on mobile?
- Yes. PE Mechanical mock tests run in any browser on mobile, tablet or desktop — no app or download needed. Start on your phone and your progress and analytics sync when you sign in.
- What is the PE Mechanical syllabus?
- The PE Mechanical syllabus maps to its 1 section: PE Mechanical (70 Q). Wrexa Edge's mock tests cover the complete syllabus topic by topic — see the topics-covered breakdown above — so you practise every area at real exam difficulty.
- What is the eligibility for PE Mechanical?
- Set by each state licensing board; the usual path is passing the FE exam, gaining qualifying engineering experience (commonly around four years under a licensed PE), then sitting the PE as the final written step toward Professional Engineer licensure. Wrexa Edge focuses on realistic PE Mechanical practice: a free full-length mock in the exact exam pattern, ready whenever you are.
- When is the PE Mechanical exam and how should I prepare?
- Official PE Mechanical exam dates are announced by the conducting body for each cycle — check the latest notification for the current schedule. To be ready, follow a phased study plan and take full-length timed mocks; Wrexa Edge gives you a free PE Mechanical mock with instant scoring so you can track your readiness week by week.
Related exams & practice tests
Candidates preparing for PE Mechanical also practise these on Wrexa Edge:
Browse more: All Engineering Licensure exams → · All United States exams → · Full exam catalog →
Ready to ace PE Mechanical?
Join thousands of candidates practising on Wrexa Edge. Free signup, 50 variants per exam, instant scoring.
Start practising free →