FE Industrial & Systems exam at a glance
50 full-length mock tests
Attempt 50 full-length mocks
Each is a distinct question set built on the real 60-question, 330-minute pattern, with instant scoring and section-wise analysis. The first is free; unlock all 50 forever for $1.99 (one-time, no subscription).
FE Industrial & Systems key facts & eligibility
| Conducting body | NCEES (National Council of Examiners for Engineering and Surveying) |
|---|---|
| Official website | ncees.org ↗ |
| Mode | The FE Industrial and Systems exam — the Industrial & Systems discipline version of the Fundamentals of Engineering exam, the first step toward PE licensure. It is a computer-based test delivered year-round at Pearson VUE centres. |
| Frequency | Offered year-round by appointment at Pearson VUE test centres. |
| Scoring & marking | It has 110 questions in a 6-hour appointment (8-minute tutorial, 5 hours 20 minutes of testing, and a 25-minute break). It is closed-book with a searchable electronic FE Reference Handbook. Alongside the common foundations (mathematics, probability & statistics, ethics, engineering economics), it covers engineering sciences, modelling and quantitative analysis, operations research, industrial management, systems and manufacturing, ergonomics/safety, and quality and reliability. Results are reported pass/fail. |
| Score validity | A pass is a permanent step toward PE licensure. |
| Language | English. |
Who is eligible for FE Industrial & Systems?
Typically taken by final-year students or graduates of an engineering program; requirements vary by state licensing board.
Last verified July 2026 against NCEES — FE Exam. Always confirm current details on the official website before you register.
FE Industrial & Systems section breakdown
The FE Industrial & Systems mock test on Wrexa Edge replicates the real exam's section structure — same names, same question count per section, same time limits. No inter-section breaks — the timer runs continuously.
-
FE Industrial & Systems (60 Q)
Marking scheme
+1 per correct. Try your score.
Strategy: FE Industrial & Systems has no negative marking. Attempt every question — blank answers cost you potential marks but cannot pull your score down.
Scale: FE Industrial & Systems (pass 700/1000).
How FE Industrial & Systems is conducted
- Mode
- Test format
- Backtracking
- Mark for review
FE Industrial & Systems time strategy
With 60 questions in 330 minutes, you have about 330 seconds per question on average. Successful candidates aim for the following pacing on each section:
- FE Industrial & Systems (60 Q)
Wrexa Edge's analytics show your actual time-per-question after every mock so you can spot which sections you're losing time on.
FE Industrial & Systems topics covered
Across the 50 Wrexa Edge variants of FE Industrial & Systems, the following topics appear most often (sample distribution from one variant):
FE Industrial & Systems (60 Q)
- FE Industrial & Systems — Manufacturing & Production · 11
- FE Industrial & Systems — Modeling & Computations · 11
- FE Industrial & Systems — Quality · 11
- FE Industrial & Systems — Ergonomics · 7
- FE Industrial & Systems — Supply Chain Management · 7
- FE Industrial & Systems — Probability & Statistics · 6
- FE Industrial & Systems — Engineering Economics · 4
- FE Industrial & Systems — Work Design · 3
FE Industrial & Systems difficulty calibration
Advanced tier. Advanced-level: high-stakes exam with rigorous content depth. Expect 4-8 months of structured prep.
FE · 110 Q in 5h20m (CBT). Engineering economics, probability/statistics, modeling & quantitative analysis, manufacturing, ergonomics & work design. · Official language: English.
Verified content — Wrexa Edge's FE Industrial & Systems bank has been deeply curated with real exam-aligned content (estimated 100% syllabus coverage).
How Wrexa Edge prepares you for FE Industrial & Systems
- Real test-day interface
- 50 distinct variants
- Detailed analytics
- Spaced repetition (Notebook)
- Optional proctoring
- Free to start
Expert take: what FE Industrial & Systems really tests
The FE Industrial and Systems exam (NCEES) is the industrial-discipline Fundamentals of Engineering exam and the first step toward PE licensure — 110 questions in a 6-hour appointment, closed-book with a searchable FE Reference Handbook. Beyond the common foundations, it covers operations research, systems/manufacturing, industrial management, ergonomics/safety and quality/reliability. Results are pass/fail.
Preparation tips
- Learn to navigate the FE Reference Handbook fast — it is your only reference.
- Prioritise operations research and quality/reliability.
- Work the official NCEES FE Industrial and Systems practice exam.
Common mistakes to avoid
- Relying on memory instead of practising Handbook lookups under time.
- Neglecting the foundational math and engineering-economics questions.
FE Industrial & Systems study plan
A phase-by-phase roadmap from your first concept to test-ready. Stretch or compress each phase to fit the time you have before your attempt.
- Math, probability/statistics, engineering economics, ethics
- Navigating the FE Reference Handbook
- Topic practice problems
- Operations research and modelling
- Systems, manufacturing and industrial management
- Quality, reliability and ergonomics/safety
- Full 110-question timed practice
- Handbook-navigation speed drills
- Target a confident pass
Where FE Industrial & Systems can take you
A strong FE Industrial & Systems result opens up these careers and higher-study paths:
- Path to PE
- Industrial focus
- Handbook-based
- Pass/fail
Best books & official prep for FE Industrial & Systems
- FE Reference Handbook — NCEES
- FE Industrial and Systems practice exam — NCEES
Official practice: Practise with the searchable FE Reference Handbook and the official NCEES FE Industrial and Systems practice exam; emphasise operations research and quality/reliability.
Previous-year papers: NCEES sells an official FE Industrial and Systems practice exam; live questions are not released.
Sample FE Industrial & Systems practice questions
5 questions taken from the FE Industrial & Systems mock tests on Wrexa Edge. Try each one, then reveal the answer.
-
Q1. Which wrist posture should hand-tool design aim to maintain to reduce carpal tunnel risk?
- Sustained ulnar deviation
- Full wrist flexion
- Full wrist extension
- A neutral, straight wrist
Show answer
Answer: D — A neutral, straight wrist
-
Q2. A dimension is normally distributed with mean 50 mm and standard deviation 4 mm. What fraction of parts exceed 58 mm?
- 0.0228
- 0.0455
- 0.159
- 0.977
Show answer
Answer: A — 0.0228
-
Q3. A machine has availability 0.90, performance 0.95 and quality rate 0.98. What is its overall equipment effectiveness?
- 94.3%
- 83.8%
- 85.5%
- 88.2%
Show answer
Answer: B — 83.8%
-
Q4. For the same PERT activity (a = 4, m = 6, b = 14 days), what is the variance of its duration?
- 1.67 days²
- 11.1 days²
- 2.78 days²
- 8.33 days²
Show answer
Answer: C — 2.78 days²
-
Q5. Which technique solves multistage decision problems by recursively optimizing each stage?
- Linear regression
- Monte Carlo simulation
- Goal programming
- Dynamic programming
Show answer
Answer: D — Dynamic programming
Frequently asked questions
- What is the FE Industrial & Systems exam pattern?
- NCEES FE Industrial and Systems contains 60 questions across 1 section: FE Industrial & Systems (60 Q). Total duration is 330 minutes (about 330 seconds per question).
- Does FE Industrial & Systems have negative marking?
- No — FE Industrial & Systems has no negative marking. Each correct answer is worth 1 mark, so attempt every question.
- How is FE Industrial & Systems scored?
- Scaled score range: 100 to 1000. FE Industrial & Systems (pass 700/1000).
- How can I practise FE Industrial & Systems online for free?
- Wrexa Edge gives you a free full-length FE Industrial & Systems mock test — with instant scoring, detailed explanations and analytics — plus 49 more with a one-time $1.99 unlock that never expires. Start practising in under a minute, no card required.
- What is the difficulty level of FE Industrial & Systems?
- FE Industrial & Systems is rated Advanced difficulty on Wrexa Edge. Advanced-level: high-stakes exam with rigorous content depth. Expect 4-8 months of structured prep. FE · 110 Q in 5h20m (CBT). Engineering economics, probability/statistics, modeling & quantitative analysis, manufacturing, ergonomics & work design. · Official language: English.
- How long is the FE Industrial & Systems exam?
- FE Industrial & Systems runs for 330 minutes total. On Wrexa Edge the timer is enforced exactly as on the real exam — including no inter-section breaks.
- What topics are covered in FE Industrial & Systems?
- FE Industrial & Systems is split into: FE Industrial & Systems (60 Q). Each section is timed and weighted separately. FE · 110 Q in 5h20m (CBT). Engineering economics, probability/statistics, modeling & quantitative analysis, manufacturing, ergonomics & work design. · Official language: English.
- What tools or aids are allowed during FE Industrial & Systems?
- No special tools are required. Note: real exam is proctored — Wrexa Edge mirrors this with a webcam-based proctoring flow you can enable.
- Is the FE Industrial & Systems test adaptive?
- No — FE Industrial & Systems is a fixed-form (linear) test. Every candidate sees the same number of questions per section.
- How many FE Industrial & Systems mock tests does Wrexa Edge offer?
- Wrexa Edge generates 50 distinct FE Industrial & Systems variants — each with different question content, not just shuffled options — the first one free for everyone and 49 more with a one-time $1.99 unlock. That's 3000 unique practice questions in the real test-day interface.
- Is there a free FE Industrial & Systems test series 2026?
- Yes. The Wrexa Edge FE Industrial & Systems test series for 2026 gives you a free full-length mock test (50 in total) plus subject-wise and topic-wise tests — instant scoring and detailed analysis, no card required.
- Are FE Industrial & Systems previous year question–style papers included?
- Every FE Industrial & Systems mock is modelled on the official exam pattern and the style of previous years' papers — the same 60-question structure, sections and marking — so your practice mirrors the real paper you'll sit.
- Which is the best free FE Industrial & Systems mock test online?
- Wrexa Edge's FE Industrial & Systems mock test replicates the real exam interface, timing and marking scheme, with instant score, section-wise analysis and 50 fresh variants — a strong free choice for 2026 preparation.
- Can I take the FE Industrial & Systems mock test on mobile?
- Yes. FE Industrial & Systems mock tests run in any browser on mobile, tablet or desktop — no app or download needed. Start on your phone and your progress and analytics sync when you sign in.
- What is the FE Industrial & Systems syllabus?
- The FE Industrial & Systems syllabus maps to its 1 section: FE Industrial & Systems (60 Q). Wrexa Edge's mock tests cover the complete syllabus topic by topic — see the topics-covered breakdown above — so you practise every area at real exam difficulty.
- What is the eligibility for FE Industrial & Systems?
- Typically taken by final-year students or graduates of an engineering program; requirements vary by state licensing board. Wrexa Edge focuses on realistic FE Industrial & Systems practice: a free full-length mock in the exact exam pattern, ready whenever you are.
- When is the FE Industrial & Systems exam and how should I prepare?
- Official FE Industrial & Systems exam dates are announced by the conducting body for each cycle — check the latest notification for the current schedule. To be ready, follow a phased study plan and take full-length timed mocks; Wrexa Edge gives you a free FE Industrial & Systems mock with instant scoring so you can track your readiness week by week.
Related exams & practice tests
Candidates preparing for FE Industrial & Systems also practise these on Wrexa Edge:
Browse more: All Engineering Licensure exams → · All United States exams → · Full exam catalog →
Ready to ace FE Industrial & Systems?
Join thousands of candidates practising on Wrexa Edge. Free signup, 50 variants per exam, instant scoring.
Start practising free →