FE: Statics (NCEES FE — Statics (topic practice)) — Free Online Mock Test

  • FE topic practice
  • Statics
  • on the official NCEES Fundamentals of Engineering knowledge areas.
  • Official language: English.
  • Official language: English.
Advanced United States Engineering Licensure 18 questions 27 min 50 distinct variants
Start free practice test →

FE: Statics exam at a glance

18
Questions
27
Minutes total
1
Section
50
Variants

50 full-length mock tests

Attempt 50 full-length mocks

Each is a distinct question set built on the real 18-question, 27-minute pattern, with instant scoring and section-wise analysis. The first is free; unlock all 50 forever for $1.99 (one-time, no subscription).

FreeUnlock for $1.99
Unlock all 50 FE: Statics tests — $1.99 Start free mock →

FE: Statics key facts & eligibility

FE: Statics at a glance — verified exam facts
Conducting bodyNCEES (National Council of Examiners for Engineering and Surveying)
Official websitencees.org ↗
ModeFocused practice on the Statics knowledge area of the NCEES FE exam. Statics is an engineering-science topic on the mechanical, civil, other-disciplines and related FE discipline versions, answered using the searchable electronic FE Reference Handbook.
FrequencyThe FE exam is offered year-round at Pearson VUE test centres.
Scoring & markingOn the FE, statics covers resultants of force systems, equilibrium of rigid bodies, analysis of trusses and frames, centroids and moments of inertia, and friction — all supported by the FE Reference Handbook.
LanguageEnglish.

Who is eligible for FE: Statics?

For candidates preparing for an FE discipline exam that includes statics (mechanical, civil, other disciplines and similar).

Last verified July 2026 against NCEES — FE Exam. Always confirm current details on the official website before you register.

FE: Statics section breakdown

The FE: Statics mock test on Wrexa Edge replicates the real exam's section structure — same names, same question count per section, same time limits. No inter-section breaks — the timer runs continuously.

  • FE: Statics (18 Q)

Marking scheme

+1 per correct. Try your score.

+1Correct
0Wrong
0Unanswered
Your score0/ 1000

Strategy: FE: Statics has no negative marking. Attempt every question — blank answers cost you potential marks but cannot pull your score down.

Scale: FE: Statics (pass 700/1000).

How FE: Statics is conducted

  • Mode
  • Test format
  • Backtracking
  • Mark for review

FE: Statics time strategy

With 18 questions in 27 minutes, you have about 90 seconds per question on average. Successful candidates aim for the following pacing on each section:

  • FE: Statics (18 Q)

Wrexa Edge's analytics show your actual time-per-question after every mock so you can spot which sections you're losing time on.

FE: Statics topics covered

Across the 50 Wrexa Edge variants of FE: Statics, the following topics appear most often (sample distribution from one variant):

FE: Statics (18 Q)

  • Statics · 8
  • Statics — Beams · 2
  • Statics — Force Components · 1
  • Statics — Equilibrium · 1
  • Statics — Cables · 1
  • Statics — Trusses · 1
  • Statics — Centroid · 1
  • Statics — Moment of Inertia · 1

FE: Statics difficulty calibration

Advanced tier. Advanced-level: high-stakes exam with rigorous content depth. Expect 4-8 months of structured prep.

FE topic practice · Statics · on the official NCEES Fundamentals of Engineering knowledge areas. Official language: English. · Official language: English.

Verified content — Wrexa Edge's FE: Statics bank has been deeply curated with real exam-aligned content (estimated 100% syllabus coverage).

How Wrexa Edge prepares you for FE: Statics

  • Real test-day interface
  • 50 distinct variants
  • Detailed analytics
  • Spaced repetition (Notebook)
  • Optional proctoring
  • Free to start

Expert take: what FE: Statics really tests

Statics is an engineering-science knowledge area on the mechanical, civil, other-disciplines and related NCEES FE exams, answered using the FE Reference Handbook. It covers force-system resultants, equilibrium of rigid bodies, trusses and frames, centroids and moments of inertia, and friction.

Preparation tips

  • Draw careful free-body diagrams before applying equilibrium.
  • Practise truss analysis (method of joints and sections).
  • Know the centroid and moment-of-inertia formulas in the Handbook.

Common mistakes to avoid

  • Sign and direction errors in free-body diagrams.
  • Forgetting friction limits and support-reaction conventions.

FE: Statics study plan

A phase-by-phase roadmap from your first concept to test-ready. Stretch or compress each phase to fit the time you have before your attempt.

1 Phase 1 — Equilibrium Week 1
  • Force resultants and equilibrium
  • Free-body diagrams
  • Handbook formula location
2 Phase 2 — Structures & properties Week 2
  • Trusses and frames
  • Centroids, moments of inertia and friction
  • Timed problem drills
3 Phase 3 — Speed Final days
  • Fast Handbook lookups
  • Mixed FE statics sets
  • Accuracy under time

Where FE: Statics can take you

A strong FE: Statics result opens up these careers and higher-study paths:

  • FE engineering science
  • Structural base
  • Handbook fluency
  • Toward PE

Best books & official prep for FE: Statics

  • FE Reference Handbook — Statics section — NCEES
  • FE statics review problems — Various

Official practice: Practise force-system resultants, equilibrium, truss/frame analysis and friction using the FE Reference Handbook; set up free-body diagrams carefully.

Previous-year papers: Practise with the statics questions in the official NCEES FE practice exams.

Sample FE: Statics practice questions

5 questions taken from the FE: Statics mock tests on Wrexa Edge. Try each one, then reveal the answer.

  1. Q1. A roller support provides a reaction:

    1. Along the surface
    2. As a moment
    3. In all directions
    4. Perpendicular to the supporting surface
    Show answer

    Answer: D — Perpendicular to the supporting surface

  2. Q2. The area moment of inertia has units of:

    1. Length to the fourth power
    2. Length squared
    3. Length cubed
    4. Mass × length²
    Show answer

    Answer: A — Length to the fourth power

  3. Q3. The method of joints analyzes a truss by applying equilibrium:

    1. By cutting members only
    2. At each joint (pin)
    3. Using global moments only
    4. Ignoring the reactions
    Show answer

    Answer: B — At each joint (pin)

  4. Q4. A zero-force member in a truss carries:

    1. Maximum load
    2. Only compression
    3. No load
    4. Only tension
    Show answer

    Answer: C — No load

  5. Q5. The maximum static friction force is:

    1. μk·N exactly
    2. Infinite
    3. Always equal to the weight
    4. μs·N
    Show answer

    Answer: D — μs·N

Frequently asked questions

What is the FE: Statics exam pattern?
NCEES FE — Statics (topic practice) contains 18 questions across 1 section: FE: Statics (18 Q). Total duration is 27 minutes (about 90 seconds per question).
Does FE: Statics have negative marking?
No — FE: Statics has no negative marking. Each correct answer is worth 1 mark, so attempt every question.
How is FE: Statics scored?
Scaled score range: 100 to 1000. FE: Statics (pass 700/1000).
How can I practise FE: Statics online for free?
Wrexa Edge gives you a free full-length FE: Statics mock test — with instant scoring, detailed explanations and analytics — plus 49 more with a one-time $1.99 unlock that never expires. Start practising in under a minute, no card required.
What is the difficulty level of FE: Statics?
FE: Statics is rated Advanced difficulty on Wrexa Edge. Advanced-level: high-stakes exam with rigorous content depth. Expect 4-8 months of structured prep. FE topic practice · Statics · on the official NCEES Fundamentals of Engineering knowledge areas. Official language: English. · Official language: English.
How long is the FE: Statics exam?
FE: Statics runs for 27 minutes total. On Wrexa Edge the timer is enforced exactly as on the real exam — including no inter-section breaks.
What topics are covered in FE: Statics?
FE: Statics is split into: FE: Statics (18 Q). Each section is timed and weighted separately. FE topic practice · Statics · on the official NCEES Fundamentals of Engineering knowledge areas. Official language: English. · Official language: English.
What tools or aids are allowed during FE: Statics?
No special tools are required. Note: real exam is proctored — Wrexa Edge mirrors this with a webcam-based proctoring flow you can enable.
Is the FE: Statics test adaptive?
No — FE: Statics is a fixed-form (linear) test. Every candidate sees the same number of questions per section.
How many FE: Statics mock tests does Wrexa Edge offer?
Wrexa Edge generates 50 distinct FE: Statics variants — each with different question content, not just shuffled options — the first one free for everyone and 49 more with a one-time $1.99 unlock. That's 900 unique practice questions in the real test-day interface.
Is there a free FE: Statics test series 2026?
Yes. The Wrexa Edge FE: Statics test series for 2026 gives you a free full-length mock test (50 in total) plus subject-wise and topic-wise tests — instant scoring and detailed analysis, no card required.
Are FE: Statics previous year question–style papers included?
Every FE: Statics mock is modelled on the official exam pattern and the style of previous years' papers — the same 18-question structure, sections and marking — so your practice mirrors the real paper you'll sit.
Which is the best free FE: Statics mock test online?
Wrexa Edge's FE: Statics mock test replicates the real exam interface, timing and marking scheme, with instant score, section-wise analysis and 50 fresh variants — a strong free choice for 2026 preparation.
Can I take the FE: Statics mock test on mobile?
Yes. FE: Statics mock tests run in any browser on mobile, tablet or desktop — no app or download needed. Start on your phone and your progress and analytics sync when you sign in.
What is the FE: Statics syllabus?
The FE: Statics syllabus maps to its 1 section: FE: Statics (18 Q). Wrexa Edge's mock tests cover the complete syllabus topic by topic — see the topics-covered breakdown above — so you practise every area at real exam difficulty.
What is the eligibility for FE: Statics?
For candidates preparing for an FE discipline exam that includes statics (mechanical, civil, other disciplines and similar). Wrexa Edge focuses on realistic FE: Statics practice: a free full-length mock in the exact exam pattern, ready whenever you are.
When is the FE: Statics exam and how should I prepare?
Official FE: Statics exam dates are announced by the conducting body for each cycle — check the latest notification for the current schedule. To be ready, follow a phased study plan and take full-length timed mocks; Wrexa Edge gives you a free FE: Statics mock with instant scoring so you can track your readiness week by week.

Related exams & practice tests

Candidates preparing for FE: Statics also practise these on Wrexa Edge:

Browse more: All Engineering Licensure exams →  ·  All United States exams →  ·  Full exam catalog →

Ready to ace FE: Statics?

Join thousands of candidates practising on Wrexa Edge. Free signup, 50 variants per exam, instant scoring.

Start practising free →
Wrexa Edge Mock Tests and Exams app icon
Wrexa Edge — Mock Tests & ExamsAvailable
Practise on the go — 1,900+ exams with the real interface, timer & marking. 1 free mock each.
Get it onGoogle Play
Wrexa Edge Mock Tests and Exams app icon
Get the Wrexa Edge app
Practise on your phone · free to start
Google Play