FE: Thermodynamics & Heat Transfer (NCEES FE — Thermodynamics & Heat Transfer (topic practice)) — Free Online Mock Test

FE: Thermodynamics & Heat Transfer exam at a glance

FE: Thermodynamics & Heat Transfer full-length mock tests

Attempt 50 full-length FE: Thermodynamics & Heat Transfer mock tests, each a distinct question set built on the real 18-question, 27-minute pattern — with instant scoring and section-wise analysis. The first 3 are free.

FE: Thermodynamics & Heat Transfer key facts & eligibility

Who is eligible for FE: Thermodynamics & Heat Transfer?

For candidates preparing for an FE discipline exam that includes thermodynamics and heat transfer.

Last verified July 2026 against NCEES — FE Exam. Always confirm current details on the official website before you register.

FE: Thermodynamics & Heat Transfer section breakdown

The FE: Thermodynamics & Heat Transfer mock test on Wrexa Edge replicates the real exam's section structure — same names, same question count per section, same time limits. No inter-section breaks — the timer runs continuously.

• FE: Thermodynamics & Heat Transfer (18 Q)
  18 questions · 27 minutes · ~90 sec/question

FE: Thermodynamics & Heat Transfer scoring & marking scheme

Strategy: FE: Thermodynamics & Heat Transfer has no negative marking. Attempt every question — blank answers cost you potential marks but cannot pull your score down.

Scale: FE: Thermodynamics & Heat Transfer (pass 700/1000).

How FE: Thermodynamics & Heat Transfer is conducted

• Mode
  Proctored — Wrexa Edge mirrors this with a webcam-based proctoring flow (face detection, room scan, fullscreen lock, tab-switch detection).
• Test format
  Linear / fixed-form — every candidate sees the same number of questions per section.
• Backtracking
  Allowed — you can revisit and change answers within a section.
• Mark for review
  Available — flag tough questions and return to them before submitting the section.

FE: Thermodynamics & Heat Transfer time strategy

With 18 questions in 27 minutes, you have about 90 seconds per question on average. Successful candidates aim for the following pacing on each section:

• FE: Thermodynamics & Heat Transfer (18 Q)
  Target ~90 sec/question. If a question takes more than 135 seconds, mark for review and move on.

Wrexa Edge's analytics show your actual time-per-question after every mock so you can spot which sections you're losing time on.

FE: Thermodynamics & Heat Transfer topics covered

Across the 50 Wrexa Edge variants of FE: Thermodynamics & Heat Transfer, the following topics appear most often (sample distribution from one variant):

FE: Thermodynamics & Heat Transfer (18 Q)

• Thermodynamics & Heat Transfer · 8
• Thermo — Carnot · 2
• Heat — Conduction · 2
• Thermo — First Law · 1
• Thermo — Second Law · 1
• Thermo — Gas Constants · 1
• Thermo — Ideal Gas · 1
• Thermo — Processes · 1

FE: Thermodynamics & Heat Transfer difficulty calibration

Advanced tier. Advanced-level: high-stakes exam with rigorous content depth. Expect 4-8 months of structured prep.

FE topic practice · Thermodynamics & Heat Transfer · on the official NCEES Fundamentals of Engineering knowledge areas. Official language: English. · Official language: English.

Verified content — Wrexa Edge's FE: Thermodynamics & Heat Transfer bank has been deeply curated with real exam-aligned content (estimated 100% syllabus coverage).

How Wrexa Edge prepares you for FE: Thermodynamics & Heat Transfer

• Real test-day interface
  Our cert skin mirrors the actual FE: Thermodynamics & Heat Transfer testing software — same timer, palette, tools, and navigation.
• 50 distinct variants
  900 unique practice questions, each variant a fresh test — not just shuffled options.
• Detailed analytics
  Scaled score, section accuracy, topic-wise heatmap, time-per-question — see where to focus after every attempt.
• Spaced repetition (Notebook)
  Wrong answers and flagged questions flow into an SM-2 spaced-repetition deck so you actually retain what you learn.
• Optional proctoring
  Browser-based face-api detection (no install) — turn it on to simulate real FE: Thermodynamics & Heat Transfer test-day conditions.
• Free to start
  No credit card. Sign up, pick a variant, and your first FE: Thermodynamics & Heat Transfer mock starts in under a minute.

Expert take: what FE: Thermodynamics & Heat Transfer really tests

Thermodynamics and Heat Transfer are engineering-science knowledge areas on the mechanical, chemical, other-disciplines and related NCEES FE exams, answered using the FE Reference Handbook. Thermodynamics covers the first and second laws, properties, ideal gases and cycles; heat transfer covers conduction, convection and radiation and basic heat exchangers.

FE: Thermodynamics & Heat Transfer study plan

A phase-by-phase roadmap from your first concept to test-ready. Stretch or compress each phase to fit the time you have before your attempt.

Where FE: Thermodynamics & Heat Transfer can take you

A strong FE: Thermodynamics & Heat Transfer result opens up these careers and higher-study paths:

• FE engineering science
  On the mechanical, chemical and other-disciplines FE exams.
• Energy base
  Underpins power, HVAC and process engineering.
• Table fluency
  Property tables are in the Handbook.
• Toward PE
  Part of the FE, the first step to PE licensure.

Best books & official prep for FE: Thermodynamics & Heat Transfer

• FE Reference Handbook — Thermodynamics & Heat Transfer sections — NCEES
  Know the property tables and heat-transfer relations.
• FE thermodynamics/heat-transfer review problems — Various
  Drill cycle analysis and conduction/convection problems.

Official practice: Practise first/second-law analysis, property tables, cycles and conduction/convection/radiation using the FE Reference Handbook.

Previous-year papers: Practise with the thermodynamics and heat-transfer questions in the official NCEES FE practice exams.

Frequently asked questions

What is the FE: Thermodynamics & Heat Transfer exam pattern?

NCEES FE — Thermodynamics & Heat Transfer (topic practice) contains 18 questions across 1 section: FE: Thermodynamics & Heat Transfer (18 Q). Total duration is 27 minutes (about 90 seconds per question).

Does FE: Thermodynamics & Heat Transfer have negative marking?

No — FE: Thermodynamics & Heat Transfer has no negative marking. Each correct answer is worth 1 mark, so attempt every question.

How is FE: Thermodynamics & Heat Transfer scored?

Scaled score range: 100 to 1000. FE: Thermodynamics & Heat Transfer (pass 700/1000).

How can I practise FE: Thermodynamics & Heat Transfer online for free?

Wrexa Edge gives you 3 free full-length FE: Thermodynamics & Heat Transfer mock tests — with instant scoring, detailed explanations and analytics — plus 47 more with Pro. Start practising in under a minute, no card required.

What is the difficulty level of FE: Thermodynamics & Heat Transfer?

FE: Thermodynamics & Heat Transfer is rated Advanced difficulty on Wrexa Edge. Advanced-level: high-stakes exam with rigorous content depth. Expect 4-8 months of structured prep. FE topic practice · Thermodynamics & Heat Transfer · on the official NCEES Fundamentals of Engineering knowledge areas. Official language: English. · Official language: English.

How long is the FE: Thermodynamics & Heat Transfer exam?

FE: Thermodynamics & Heat Transfer runs for 27 minutes total. On Wrexa Edge the timer is enforced exactly as on the real exam — including no inter-section breaks.

What topics are covered in FE: Thermodynamics & Heat Transfer?

FE: Thermodynamics & Heat Transfer is split into: FE: Thermodynamics & Heat Transfer (18 Q). Each section is timed and weighted separately. FE topic practice · Thermodynamics & Heat Transfer · on the official NCEES Fundamentals of Engineering knowledge areas. Official language: English. · Official language: English.

What tools or aids are allowed during FE: Thermodynamics & Heat Transfer?

No special tools are required. Note: real exam is proctored — Wrexa Edge mirrors this with a webcam-based proctoring flow you can enable.

Is the FE: Thermodynamics & Heat Transfer test adaptive?

No — FE: Thermodynamics & Heat Transfer is a fixed-form (linear) test. Every candidate sees the same number of questions per section.

How many FE: Thermodynamics & Heat Transfer mock tests does Wrexa Edge offer?

Wrexa Edge generates 50 distinct FE: Thermodynamics & Heat Transfer variants — each with different question content, not just shuffled options — the first 3 free for everyone and 47 more with Pro. That's 900 unique practice questions in the real test-day interface.

Is there a free FE: Thermodynamics & Heat Transfer test series 2026?

Yes. The Wrexa Edge FE: Thermodynamics & Heat Transfer test series for 2026 gives you 3 free full-length mock tests (50 in total) plus subject-wise and topic-wise tests — instant scoring and detailed analysis, no card required.

Are FE: Thermodynamics & Heat Transfer previous year question–style papers included?

Every FE: Thermodynamics & Heat Transfer mock is modelled on the official exam pattern and the style of previous years' papers — the same 18-question structure, sections and marking — so your practice mirrors the real paper you'll sit.

Which is the best free FE: Thermodynamics & Heat Transfer mock test online?

Wrexa Edge's FE: Thermodynamics & Heat Transfer mock test replicates the real exam interface, timing and marking scheme, with instant score, section-wise analysis and 50 fresh variants — a strong free choice for 2026 preparation.

Can I take the FE: Thermodynamics & Heat Transfer mock test on mobile?

Yes. FE: Thermodynamics & Heat Transfer mock tests run in any browser on mobile, tablet or desktop — no app or download needed. Start on your phone and your progress and analytics sync when you sign in.

What is the FE: Thermodynamics & Heat Transfer syllabus?

The FE: Thermodynamics & Heat Transfer syllabus maps to its 1 section: FE: Thermodynamics & Heat Transfer (18 Q). Wrexa Edge's mock tests cover the complete syllabus topic by topic — see the topics-covered breakdown above — so you practise every area at real exam difficulty.

What is the eligibility for FE: Thermodynamics & Heat Transfer?

For candidates preparing for an FE discipline exam that includes thermodynamics and heat transfer. Wrexa Edge focuses on realistic FE: Thermodynamics & Heat Transfer practice: 3 free full-length mocks in the exact exam pattern, ready whenever you are.

When is the FE: Thermodynamics & Heat Transfer exam and how should I prepare?

Official FE: Thermodynamics & Heat Transfer exam dates are announced by the conducting body for each cycle — check the latest notification for the current schedule. To be ready, follow a phased study plan and take full-length timed mocks; Wrexa Edge gives you 3 free FE: Thermodynamics & Heat Transfer mocks with instant scoring so you can track your readiness week by week.

Related exams & practice tests

Candidates preparing for FE: Thermodynamics & Heat Transfer also practise these on Wrexa Edge:

Browse more: All Engineering Licensure exams →  ·  All United States exams →  ·  Full exam catalog →

• Global exam practice tests
• Exam calendar 2026

Ready to ace FE: Thermodynamics & Heat Transfer?

Join thousands of candidates practising on Wrexa Edge. Free signup, 50 variants per exam, instant scoring.